Diagram of Working Principle
Models and Specification
| Model | Outside Diameter D (mm) |
Screw Thread M (mm) |
Wall Thickness (mm) |
Length L1 (mm) |
Length L2 (mm) |
Diagram |
| S12 | 12.0 | M1 | 0.5 | 40 | 10 | |
| S14 | 14.0 | M1 | 0.5 | 40 | 10 | |
| S16 | 16.0 | M1 | 0.5 | 50 | 16 | |
| S18 | 18.0 | M1 | 0.5 | 50 | 16 | |
| S20 | 20.0 | M1 | 0.5 | 60 | 18 | |
| S22 | 22.0 | M1 | 0.5 | 60 | 18 | |
| Accessories: 2 Shells pad, 2 Nuts, Cable 1.5m. | ||||||
Application
Main function of the sensor is to transform the mechanical rotation of gear to electric square wave signal. Used for measuring speed, cycle speed. They are widely used in machinery, metallurgy, petroleum, chemical, transportation, automation, military and so on.
Specification
| Power | DC ¡õ5V ¡õ12V ¡õ24V | Working Temperature |
¡õ -40~150°C ¡õ -20~65°C |
|
| Output Signal |
High Voltage ≥4V (Power DC5V) ≥10V (Power DC12V) ≥10V (Power DC24V) Low Voltage <0.3V, Square wave |
Frequency | 0.3Hz ~ 10KHz Speed (r/min) = 60 × Frequency ¸ Teeth Number |
|
| Gear modulus |
≥0.5 | Humidity | ≤95%RH | |
| Output Current | ≤30mA | Protection | Short circuit protection | |
| Suitable | Steel Gear | Insulation Resistance | ≥50MW | |
| Working Mode | NPN | Material | Copper material and nickel-plated | |
| Gap | 0.2 ~ 2.5mm | |||
Sensor Working Diagram
Order Model
S[ ][ ] Working Temperature -20 to 65°C
S[ ][ ]H Working Temperature -40 to 150°C
Here [ ][ ] is the diameter of the sensor and maybe 12,14,16,18,20,22
