Portable Pocket Products
 
Benetech Infrared Thermometer

This infrared thermometer is used for measuring the temperature of the object's surface, which is applicable for various hot, hazardous or hard-toreach objects without contact safely and quickly. This unit consist of Optics, Temperature Sensor Signal amplifier, Processing circuit and LCD Display. The Optics collected the infrared energy emitted by object and focus onto the Sensor. Then the sensor translates the energy into an electricity signal. This signal will be turned out to be digital shown on the LCD after the signal amplifier and processing circuit.
  
GM100-Benetech Ultrasonic Thickness Guage

Ultrasonic thickness gauging is a widely used nondestructive test technique for measuring the thickness of a material. This ultrasonic thickness gauge is an intelligent handhold product, which adopts ultrasonic measuring principle, and is controlled by microprocessor, provides quick and precise measurement of thickness for most of industrial material.
  
GM640-Benetech Grain Moisture Meter

This instrument is a grain moisture tester which can measure moisture content of multiple grains.It applies to allocation, procurement, storage and processing of grains.This instrument can also measure temperature of the grain.
GM816A-Benetech Anemometer

An anemometer is a device used for measuring the speed of wind, and is also a common weather station instrument. The term is derived from the Greek word anemos, which means wind, and is used to describe any wind speed measurement instrument used in meteorology.
  
GM816-Benetech Anemometer

An anemometer is a device used for measuring the speed of wind, and is also a common weather station instrument. The term is derived from the Greek word anemos, which means wind, and is used to describe any wind speed measurement instrument used in meteorology.
  
GM1362-Benetech Humidity and Temperature Meter

This digital humidity and temperature meter features high precision, quick response and high stability, can measure the temperature and humidity of the local environment for further analysis.
This unit has been widely applied in household, intelligent estate, subway, shopping mall for process control.

  

GM1365-Temperature and Humidity Data Logger
Out of clusters of humidity and temperature instruments, this low power consumption Data-Logger combines the functions of signal-sampling, display, storage and analysis, widely be applied in the industries of medics, food, agriculture, laboratory, electronics, air-conditioning, weather service, archives management, archaeology study, fibre manufacturing and cold chain logistics, because this device can provide just-in-time solution of environm ent-monitoring, alerting and recording.
  
GM8805-Benetech Carbon Monoxide Detector
A carbon monoxide detector or CO detector is a device that detects the presence of the carbon monoxide (CO) gas in order to prevent carbon monoxide poisoning. CO detectors are designed to measure CO levels over time and sound an alarm before dangerous levels of CO accumulate in an environment, giving people adequate warning to safely ventilate the area or evacuate. Some system-connected detectors also alert a monitoring service that can dispatch emergency services if necessary
  
GM8902-Benetech Air Flow Anemometer

An anemometer is a device used for measuring the speed of wind, and is also a common weather station instrument..
An air flow anemometer combines a propeller and a tail on the same axis to obtain accurate and precise wind speed and direction measurements from the same instrument. The speed of the fan is measured by a rev counter and converted to a windspeed by an electronic chip. Hence, volumetric flowrate may be calculated if the cross-sectional area is known.
In cases where the direction of the air motion is always the same, as in ventilating shafts of mines and buildings, wind vanes known as air meters are employed, and give satisfactory results.
  

GM8903-Benetech Hot Wire Anemometer

An anemometer is a device used for measuring the speed of wind, and is also a common weather station instrument. Hot wire anemometers use a very fine wire (on the order of several micrometres) electrically heated to some temperature above the ambient. Air flowing past the wire cools the wire. As the electrical resistance of most metals is dependent upon the temperature of the metal (tungsten is a popular choice for hot-wires), a relationship can be obtained between the resistance of the wire and the flow speed.
  

GM8905 Benetech Tachometer
A tachometer is an instrument measuring the rotation speed of a shaft or disk, as in a motor or other machine.The device usually displays the revolutions per minute (RPM) on a calibrated analogue dial, but digital displays are increasingly common.
SW800 SW1200 SW1500 SNDWAY Laser Distance Meter Telescope

The laser distance meter telescope and multifunctional meterage angle meterage distance telescope is a portable optoelectronic device combining The laser distance meter and a monocular in one.It can measure the distance of a stationary or slowly moving object within a certain range, and at the same time, can observe the object with great clearness.It comes with 3 models namely:SW800,SW1200,SW1500.
SW-60 Handheld Laser Distance Meter

A laser distance meter emits a pulse of laser at a target. The pulse then reflects off the target and back to the sending device (in this case, a laser distance meter). This "time of flight" principle is based on the fact that laser light travels at a fairly constant speed through the Earth’s atmosphere. Inside the meter, a simple computer quickly calculates the distance to target. This method of distance calculation is capable of measuring the distance from the Earth to the moon within a few centimeters. Laser distance meters may also be referred to as “range finders” or “laser range finders.”
Fourxing Cross Line Laser Level

Cross Line Laser Level is widely used in constructions, such as ceiling construction, floor tile, cutting plates, etc. It combines the functions of level and theodolite. Laser beams radiated from laser, which makes construction to be convenient, time-saving and easily. The high-accuracy ensures engineering quality.

GM-8901 Air Flow Anemometer

An anemometer is a device used for measuring the speed of wind, and is also a common weather station instrument..
An air flow anemometer combines a propeller and a tail on the same axis to obtain accurate and precise wind speed and direction measurements from the same instrument. The speed of the fan is measured by a rev counter and converted to a windspeed by an electronic chip. Hence, volumetric flowrate may be calculated if the cross-sectional area is known.
In cases where the direction of the air motion is always the same, as in ventilating shafts of mines and buildings, wind vanes known as air meters are employed, and give satisfactory results

 


For more information about the system, please contact sales@sensor.in